Life Day Leia Full Pin
Pin Details:
-Limited Edition 50
-Hard Enamel, pearl swirl enamel, screen printing, transluscent enamel
- Plating Material: Gold
-Quad-Posted
-Thickness: 2.5 mm thick
-3 Inches Tall (Top Pin)
-Custom Back-Stamp: Fulcrum Pins
Note About Grading: All enamel pins are made by hand, which will result in variations or imperfections. I DO NOT GRADE THE SIDES AND BACKS, as they are rarely seen when on display. I grade based on what is visible from an arm’s length away, as bigger pins are typically enjoyed on a pin board. My pin categories are as follows:
Standard: These pins are the best in the batch, but may have minor imperfections (ex. light scuffs or scratches, very minor imperfections, or slightly under-filled enamel areas, flaws that can only be seen at an angle or in certain direct light.) All pins in this batch had transluscent enamel overfill on certain parts of the back pin, and were graded based on how much overfill was on each. Standard Grades will include the least amount of overfill.
Minor Flawed: Larger or multiple imperfections visible from normal view (multiple scratches or minor screen printing alignment issues). May include areas of over-filled or under-filled enamel, small patches of enamel discoloration, small air bubbles or pin pricks, noticeable flaws at an angle etc.
Major Flawed: Larger and more noticeable flaws of any kind. This category may also include more noticeable flaws to main features of the pin, including face flaws. May include any of the above flaws in addition to plating flaws, larger areas of enamel overfill, larger or multiple under-filled areas, large areas of pin pricks, minor face flaws, etc.
No Grade: Larger and more noticeable flaws than Major Flawed grade pins. This category may include noticeable underfill, more than the Major Flawed pins. There may be noticeable facial flaws.
Please be aware of the grading before purchasing products, as I do not offer refunds for “flawed” pins.
Pin Details:
-Limited Edition 50
-Hard Enamel, pearl swirl enamel, screen printing, transluscent enamel
- Plating Material: Gold
-Quad-Posted
-Thickness: 2.5 mm thick
-3 Inches Tall (Top Pin)
-Custom Back-Stamp: Fulcrum Pins
Note About Grading: All enamel pins are made by hand, which will result in variations or imperfections. I DO NOT GRADE THE SIDES AND BACKS, as they are rarely seen when on display. I grade based on what is visible from an arm’s length away, as bigger pins are typically enjoyed on a pin board. My pin categories are as follows:
Standard: These pins are the best in the batch, but may have minor imperfections (ex. light scuffs or scratches, very minor imperfections, or slightly under-filled enamel areas, flaws that can only be seen at an angle or in certain direct light.) All pins in this batch had transluscent enamel overfill on certain parts of the back pin, and were graded based on how much overfill was on each. Standard Grades will include the least amount of overfill.
Minor Flawed: Larger or multiple imperfections visible from normal view (multiple scratches or minor screen printing alignment issues). May include areas of over-filled or under-filled enamel, small patches of enamel discoloration, small air bubbles or pin pricks, noticeable flaws at an angle etc.
Major Flawed: Larger and more noticeable flaws of any kind. This category may also include more noticeable flaws to main features of the pin, including face flaws. May include any of the above flaws in addition to plating flaws, larger areas of enamel overfill, larger or multiple under-filled areas, large areas of pin pricks, minor face flaws, etc.
No Grade: Larger and more noticeable flaws than Major Flawed grade pins. This category may include noticeable underfill, more than the Major Flawed pins. There may be noticeable facial flaws.
Please be aware of the grading before purchasing products, as I do not offer refunds for “flawed” pins.
Pin Details:
-Limited Edition 50
-Hard Enamel, pearl swirl enamel, screen printing, transluscent enamel
- Plating Material: Gold
-Quad-Posted
-Thickness: 2.5 mm thick
-3 Inches Tall (Top Pin)
-Custom Back-Stamp: Fulcrum Pins
Note About Grading: All enamel pins are made by hand, which will result in variations or imperfections. I DO NOT GRADE THE SIDES AND BACKS, as they are rarely seen when on display. I grade based on what is visible from an arm’s length away, as bigger pins are typically enjoyed on a pin board. My pin categories are as follows:
Standard: These pins are the best in the batch, but may have minor imperfections (ex. light scuffs or scratches, very minor imperfections, or slightly under-filled enamel areas, flaws that can only be seen at an angle or in certain direct light.) All pins in this batch had transluscent enamel overfill on certain parts of the back pin, and were graded based on how much overfill was on each. Standard Grades will include the least amount of overfill.
Minor Flawed: Larger or multiple imperfections visible from normal view (multiple scratches or minor screen printing alignment issues). May include areas of over-filled or under-filled enamel, small patches of enamel discoloration, small air bubbles or pin pricks, noticeable flaws at an angle etc.
Major Flawed: Larger and more noticeable flaws of any kind. This category may also include more noticeable flaws to main features of the pin, including face flaws. May include any of the above flaws in addition to plating flaws, larger areas of enamel overfill, larger or multiple under-filled areas, large areas of pin pricks, minor face flaws, etc.
No Grade: Larger and more noticeable flaws than Major Flawed grade pins. This category may include noticeable underfill, more than the Major Flawed pins. There may be noticeable facial flaws.
Please be aware of the grading before purchasing products, as I do not offer refunds for “flawed” pins.
